English
العربية
Français
Pусский
Español
Português
Deutsch
Italiano
Nederlands
Türk dili
हिन्दी

Broadcast articles on gloves test items and test standards

Publish Time: 2022-02-13     Origin: Site

Test type:

Test items;

Determination of pH value:

Measurement of finger flexibility of protective gloves:

Water vapor transmittance detection method:

Water vapor absorption detection method:

Test method for permeability resistance:

 

Test type:

Insulating gloves, rubber gloves, labor protection gloves, protective gloves, latex gloves, anti-static gloves, leather gloves, dust-free gloves, sterile gloves, disposable gloves, medical gloves, canvas gloves, spinning gloves, thread gloves.

 

Test items;

Microbiological test, colony count test, physical property test, puncture resistance test, size, water impermeability, tensile force / elongation at break before aging, tensile force / elongation at break after aging and quality test.

 

Determination of pH value:

The pH value of leather protective glovess shall be determined according to the method of pH determination in leather chemical test.

 

Measurement of finger flexibility of protective gloves:

Number and condition of samples. The sample is 4 pairs of complete new protective glovess without any softening treatment.

Test method. Place the test rod on a flat table. A trained tester puts on protective glovess and picks up the test rod with his index finger and thumb. The tester shall pick up the test rod three times continuously within 30s.

Test results. According to the above method, the smallest test rod that can be picked up is the test result.

 

Water vapor transmittance detection method:

Under certain temperature and humidity conditions, the leather test piece is fixed at the mouth of the moving test bottle, and the test bottle is equipped with solid desiccant. When the test bottle moves, the water vapor is absorbed by the solid desiccant through the leather test piece. If the test bottle is weighed within the specified time, the weight of the water vapor absorbed by the desiccant through the leather during this period can be determined.

 

Water vapor absorption detection method:

Do not cut a circular sample with a diameter of 85mm from three protective gloves. The sample shall be flat without suture or material defects. The sample shall be placed in an environment with a temperature of 23 ℃ and a relative humidity of 50%.

 

Test method for permeability resistance:

Immerse the glovess in water, pressurize and inflate the inside of the gloves, and determine whether there is air leakage according to whether there are bubbles or water droplets on the surface of the gloves.


If some glovess are not suitable for inflation, water leakage detection can be used. If there are water drops on the surface of the gloves, it means that the gloves are not impermeable.


1.Water vapor absorption test: do not cut a circular sample with a diameter of 85mm from three protective gloves. The sample shall be flat without suture or material defects. The sample shall be placed in an environment with a temperature of 23 ℃ and a relative humidity of 50% for one day.


2. Penetration resistance test: immerse the glovess in water, pressurize and inflate the inside of the glovess, and determine whether there is air leakage according to whether there are bubbles or water droplets on the surface of labor protection glovess. If some gloves are not suitable for inflation, water leakage detection can be used. If there are water drops on the surface of the gloves, ESD clothes or ESD shoes, it means that the gloves are not impermeable.


Test standard:

  • GB 7543-200 disposable sterilized rubber surgical gloves

  • GB 10213-2006 disposable medical rubber inspection gloves

  • GB / T 17622-2008 insulating gloves for live working

  • GB / T 18703-2002 measurement and evaluation of hand vibration transmission rate of gloves

  • GB / T 21869-2008 determination of residual powder on the surface of medical gloves

  • GB / T 21870-2008 natural rubber latex medical glovess determination of water extracted protein improved Lowry method

  • GB / T 22845-2009 antistatic gloves

  • GB 24541-2009 hand protection mechanical hazard protective gloves

  • GB 24786-2009 disposable medical examination gloves


You are here: Home » News » ESD Cleanroom Gloves » Broadcast articles on gloves test items and test standards
LEENOL is an "ESD TOTAL SOLUTION" company to fulfill ESD requirements for factories and labs. LEENOL's product range covers LeeRackTM Handling Storage ESD Equipments, LeePakTM Packing Material, LeeBenchTM Factory and Lab Furniture.

Contact us

Fax: +86-21-36030089-816
Tel: +86-21-36030087 / 36030089
Phone: +86-13818028193
E-mail: sales@leenol.com
Address: No. 129, 822 Lane, Zhennan Road, Putuo District, Shanghai, China 200331

E-mail Subscriptions

Copyright   Shanghai Leenol Industrial Co.,ltd. All rights reserved.