Adjustable ESD Workbench for Electronics Workshops and Laboratories

ESD Tabletop with Controlled Resistance

The workbench is equipped with an ESD tabletop with a listed electrical resistance range of 10⁶–10⁹ Ω. When installed and grounded correctly, the tabletop provides a controlled surface for handling electrostatic-sensitive components and assemblies.

The tabletop should be connected to a verified grounding point according to the facility’s ESD control procedures. Electrical performance should also be checked after installation and during routine workstation inspections.

Adjustable Supporting Structure

The standard antistatic table supports allow the workstation configuration to be adjusted according to operational requirements.

Appropriate working height is important for operators performing repetitive assembly, inspection or testing tasks. A correctly configured workbench can help reduce unnecessary reaching, bending and awkward working postures.

The available adjustment range should be confirmed before ordering.

Metal Workbench Frame

The workstation uses a metal supporting structure intended for industrial and laboratory environments.

The perforated tubular frame provides mounting positions for shelves, panels, lighting rails and workstation accessories. This allows the upper section of the bench to be organized according to the operator’s workflow.

ESD Back Panels

ESD back panels provide a defined vertical area behind the tabletop. Depending on the selected configuration, this area can support workstation organization and separate the operator’s immediate work zone from surrounding activities.

The page configuration includes two ESD back panels. Accessory compatibility and mounting positions should be confirmed during workstation planning.

Adjustable Steel Shelves

The listed configuration includes ESD steel shelves with shelf brackets. These shelves can be used to position tools, instruments, component containers and production materials above the primary work surface.

Vertical storage helps keep frequently used items accessible while preserving more tabletop space for assembly, testing or inspection activities.

The required number of shelves and their loading requirements should be confirmed before production.

Integrated Lighting

The workstation configuration includes light frame rails and workstation lights.

Dedicated lighting can improve visibility during component assembly, soldering, visual inspection and quality-control procedures. The position and angle of the light should be selected according to the operator’s working area and the type of task being performed.

Lighting voltage, power, plug type and brightness are not specified on the original page and should be confirmed before ordering.

Power Supply Junction Boxes

Power supply junction boxes are integrated into the workstation configuration to provide convenient power access for tools, testing equipment, monitors and other devices.

The required socket type, quantity, voltage and electrical configuration should be specified according to the installation country and factory power system.

Power installation and connection should be completed by qualified personnel in accordance with the facility’s electrical requirements.

Double-Layer Drawers

The workbench includes double-layer drawers for storing frequently used tools, documents and workstation accessories.

Drawer storage helps reduce clutter on the main work surface and keeps smaller items organized. The internal dimensions, locking option and drawer load capacity should be confirmed according to the intended use.

Keyboard Trays

Keyboard trays provide a designated position for computer keyboards used in testing, data recording, production control or inspection systems.

Separating the keyboard from the primary tabletop can preserve work surface space and create a more organized computer-assisted workstation.

Document Storage

The listed configuration includes a single-arm A4 file shelf. This can be used to hold work instructions, inspection documents, process sheets or other production references within the operator’s field of view.

Recommended Applications

Electronics Assembly

The workbench can be used for manual assembly of electronic products, cables, connectors, control units and component modules.

Its shelves and storage components allow tools and materials to be positioned around the operator while keeping the main ESD tabletop available for assembly work.

PCB Assembly and Handling

Printed circuit boards and electronic assemblies may be sensitive to electrostatic discharge during handling, assembly and inspection.

The ESD tabletop can form part of a controlled PCB workstation when combined with appropriate grounding equipment, ESD storage products and personnel grounding procedures.

Testing and Inspection

The workstation is suitable for functional testing, visual inspection, dimensional checking and quality-control processes.

Integrated lighting supports detailed observation, while the power boxes and keyboard trays accommodate electronic testing equipment and computer-based recording systems.

Repair and Rework Stations

Electronics repair and rework processes may require soldering equipment, testing instruments, hand tools, documents and replacement components within one workstation.

The modular frame and storage system allow these items to be organized around the technician’s primary working area.

Technical Laboratories

The adjustable workbench can be configured for electronics laboratories, product development areas and technical testing facilities.

Customized dimensions and accessory arrangements allow the workstation to be adapted to different instruments, sample sizes and laboratory procedures.

SMT Support Areas

The workbench may be positioned near SMT production lines for component preparation, feeder setup, material handling, visual checking and supporting operations.

The final configuration should reflect the materials, containers and tools used at the specific process stage.

Quality-Control Departments

Quality inspectors often require a combination of working space, lighting, documents, computers and measuring equipment.

The workstation’s tabletop, A4 file shelf, keyboard tray and upper shelves can support a more organized inspection environment.

Training and Technical Demonstration Areas

The workbench can also be configured for technical training, process demonstrations or equipment instruction where organized tools, power supply and clear work surfaces are required.