Follow Us:

Raw materials and uses of cleanroom wiper

Views: 0     Author: Site Editor     Publish Time: 2022-01-12      Origin: Site

With the development of the market, cleanroom wiper is used more and more widely. The wide use of cleanroom wiper can not only reduce the production cost, but also protect electronic products from dust and static electricity, which can be recycled. So, what material is cleanroom wiper generally made of? Where can he be applied?



The following is a list of contents:


  • Raw materials of cleanroom wiper

  • Use of cleanroom wiper



Raw materials of cleanroom wiper

In fact, cleanroom wiper is an ordinary fiber. Its amount is 100% single-layer polyester fiber, with ultrafine fiber, 75% Taenia fiber and 25% nylon. If divided by weaving method, cleanroom wiper can be divided into: s-plain weaving, d-knitting; If it is according to the edge banding, it can be divided into: no edge banding (cold cutting), the disadvantage of this cleanroom wiper is that it is easy to drop dandruff; Laser edge sealing, the disadvantage of this cleanroom wiper is that the cloth edge is too hard, which is easy to scratch the surface of sensitive display screen or electronic devices; Ultrasonic narrow edge banding breaks the fabric through the extrusion of the cutter. This edge banding is the most perfect edge banding method in the current cutting methods. There are no disadvantages of the above two dust-free fabrics, and it is more durable. Ultrasonic wide edge pressing and thermal cutting edge sealing are divided according to size, usually 4 * 4 inches, 6 * 6 inches, 9 * 9 inches, 12 * 12 inches, etc. cleanroom wiper of other specifications can also be customized according to customer requirements.


The cleanroom wiper adopts 100% continuous polyester fiber double weaving method. The surface is very soft and can be used to wipe the surface of sensitive objects. In the process of trial wiping, the dust production is low, and the fiber does not fall off during friction. It has good liquid absorption and cleaning effect of no fog, no watermark and no trace after wiping. It is suitable for dust-free purification workshop. The cleanroom wiper, dust-free wiping cloth and ultra-fine fiber cleanroom wiper are sealed by the most advanced edge cutting machine in the edge of ultra-fine fiber wiping cloth. It can not leave any particles and thread ends after wiping, and has strong stain removal ability. The cleanroom wiper can be welded and sealed on both sides, and the other two sides can be hot sealed, or the edge sealing method of welded edges on four sides can provide better edge sealing protection.


Dust free cloth, dust-free wiping cloth, ultra-fine fiber cleanroom wiper and ultra-fine fiber wiping cloth adopt 100% continuous polyester fiber double woven cloth, with soft surface, which can be used to wipe sensitive surfaces, low dust production, no fiber removal by friction, good water absorption and cleaning efficiency. It is especially suitable for dust-free purification workshop. The edges of cleanroom wiper, dust-free wiping cloth, ultra-fine fiber cleanroom wiper and ultra-fine fiber wiping cloth are sealed by the most advanced edge cutting machine, which will not leave particles and thread ends after wiping, and has strong decontamination ability. The method of edge fusion and edge sealing on both sides, hot edge sealing on the other side, or edge fusion and edge sealing on four sides can provide better edge sealing protection.



Use of cleanroom wiper

The cleanroom wiper is also widely used. It is mainly used in semiconductor production lines, chips, microprocessors, semiconductor assembly lines, disk drives, composite materials, LCD display products, circuit board production lines, precision instruments, optical products, aviation industry, PCB products, medical equipment, laboratories, dust-free workshops and other occasions, Its wide range of uses often appear in people's eyes.



If you are interested in our company's Cleanroom wiper, ESD Cleanroom Gloves, and Sticky Mat, please leave a message: https://www.leenol.com/


You are here: Home » News » ESD Cleanroom wipers » Raw materials and uses of cleanroom wiper
LEENOL is an "ESD TOTAL SOLUTION" company to fulfill ESD requirements for factories and labs. LEENOL's product range covers LeeRackTM Handling Storage ESD Equipments, LeePakTM Packing Material, LeeBenchTM Factory and Lab Furniture.

Quick links

Product

Contact us

Fax: +86-21-36030089-816
Tel: +86-21-36030087 / 36030089
Phone: +86-13818028193
E-mail: sales@leenol.com
Address: No. 129, 822 Lane, Zhennan Road, Putuo District, Shanghai, China 200331
Copyright  Shanghai Leenol Industrial Co.,ltd. All rights reserved.