English
 |
Microelectronics manufacturing loses approximately 30% of yield due to uncontrolled electrostatic discharge during manual assembly, making reliable grounding systems indispensable.
LN-1591405
LEENOL
| Quantity: | |
|---|---|
Our ESD Anti-static Wrist Strap sets the industry standard for cleanroom environments, featuring a dual-monitoring conductive loop that meets ANSI/ESD STM97.2 and IEC 61340-5-1 standards. The strap maintains a precise resistance range of 750kΩ - 35MΩ—the optimal balance between personal safety and electrostatic dissipation. Constructed from medical-grade silicone and conductive fiber blend, it achieves Class 10 cleanroom compatibility with less than 10 particles per cubic foot (≥0.5μm), making it suitable for semiconductor and biotech applications.
Dual sensing electrodes provide continuous monitoring with <1 second response time to breakages in either the wristband or coil cord. The stainless steel snap connector ensures <0.1Ω contact resistance, eliminating intermittent grounding issues common in single-point designs.
The silicone wristband undergoes 1000+ hours of ISO 14644-1 Class 5 testing with zero particle shedding, while the TPU-coated cord resists chemical degradation from isopropyl alcohol and hydrogen peroxide sterilization. Total extractable ions measure <0.1mg/cm², preventing contamination in sensitive processes.
The adjustable strap accommodates wrist circumferences from 150mm to 250mm with a low-profile buckle that reduces snagging on components. Pressure distribution ridges minimize discomfort during 12+ hour shifts, while the hypoallergenic formulation reduces skin irritation by 80% compared to rubber alternatives.
Essential for precision electrostatic control:
Semiconductor FABs: Wafer handling stations requiring Class 1 cleanroom certification
Medical Device Assembly: Implantable electronics production with biocompatibility requirements
Aerospace Microelectronics: Avionic sensor assembly with strict grounding protocols
How often should the wrist strap be tested?
We recommend daily testing using a compliance verifier (per ANSI/ESD STM11.11), with formal calibration every 6 months to maintain accuracy.
Is it compatible with glove-wearing operators?
Yes, the high-conductivity silicone maintains effective grounding through nitrile, latex, and vinyl gloves up to 0.1mm thickness.
What is the service life under continuous use?
The strap retains performance for 18+ months with daily use, while the replaceable coil cord achieves 50,000+ flex cycles before needing replacement.
Coil cord
1. 1 MΩ safety resistor in the snap
2. Excellent strain relief connection
3. PU cord and 7-stand tinsel wire
4. Cord outer diameter:2.2mm
5. Snap release: 5pounds
6. Color: light blue,black, brown
LN-1591405 ESD
Our ESD Anti-static Wrist Strap sets the industry standard for cleanroom environments, featuring a dual-monitoring conductive loop that meets ANSI/ESD STM97.2 and IEC 61340-5-1 standards. The strap maintains a precise resistance range of 750kΩ - 35MΩ—the optimal balance between personal safety and electrostatic dissipation. Constructed from medical-grade silicone and conductive fiber blend, it achieves Class 10 cleanroom compatibility with less than 10 particles per cubic foot (≥0.5μm), making it suitable for semiconductor and biotech applications.
Dual sensing electrodes provide continuous monitoring with <1 second response time to breakages in either the wristband or coil cord. The stainless steel snap connector ensures <0.1Ω contact resistance, eliminating intermittent grounding issues common in single-point designs.
The silicone wristband undergoes 1000+ hours of ISO 14644-1 Class 5 testing with zero particle shedding, while the TPU-coated cord resists chemical degradation from isopropyl alcohol and hydrogen peroxide sterilization. Total extractable ions measure <0.1mg/cm², preventing contamination in sensitive processes.
The adjustable strap accommodates wrist circumferences from 150mm to 250mm with a low-profile buckle that reduces snagging on components. Pressure distribution ridges minimize discomfort during 12+ hour shifts, while the hypoallergenic formulation reduces skin irritation by 80% compared to rubber alternatives.
Essential for precision electrostatic control:
Semiconductor FABs: Wafer handling stations requiring Class 1 cleanroom certification
Medical Device Assembly: Implantable electronics production with biocompatibility requirements
Aerospace Microelectronics: Avionic sensor assembly with strict grounding protocols
How often should the wrist strap be tested?
We recommend daily testing using a compliance verifier (per ANSI/ESD STM11.11), with formal calibration every 6 months to maintain accuracy.
Is it compatible with glove-wearing operators?
Yes, the high-conductivity silicone maintains effective grounding through nitrile, latex, and vinyl gloves up to 0.1mm thickness.
What is the service life under continuous use?
The strap retains performance for 18+ months with daily use, while the replaceable coil cord achieves 50,000+ flex cycles before needing replacement.
Coil cord
1. 1 MΩ safety resistor in the snap
2. Excellent strain relief connection
3. PU cord and 7-stand tinsel wire
4. Cord outer diameter:2.2mm
5. Snap release: 5pounds
6. Color: light blue,black, brown
LN-1591405 ESD
